|
MILITEC-1 SPECIFICATIONS
| Flash point ASTM (D92) |
410F/210C |
| Pour point ASTM (D97) |
-45F/-42C |
| Autoignition Temperature ASTM (D2155) |
715F/380C |
| Cloud point ASTM (D2500) |
-25F/-32C |
| Fire point ASTM (D92) |
455F/235C |
| Precipitation Number ASTM (D91) |
0.00 |
| Rust Prevention Precedure ASTM (D-665) |
Pass |
Kinematic Viscosity ASTM (D445)
| a. Viscosity @ 100F/38C cst |
43.41 |
| b. Viscosity @ 104F/40C cst |
39.03 |
| c. Viscosity @ 210F/99C cst |
5.80 |
| d. Viscosity @ 212F/100C cst |
5.63 |
Falex Load Carrying Capacity in accordance with Paragraph 4.7 of MIL-L-63460D
Exceeding 60 seconds @ 750 pounds.
Load wear index (4 ball EP) ASTM (D-2783)
| Description |
Results |
| Load wear index |
158.75 |
| Last non-seizure (scar) |
100 Kg (0.45 mm) |
| Last seizure (scar) |
620 Kg (1.53 mm) |
| Weld Load |
800 Kg |
Falex Pin + "V" Block Test, ASTM (D-3233) Procedure A 4,500 lb gauge 120F
pre-heat
| Load, lbs |
Starting Torque |
Final Torque |
| 300 lbs @ 5 minutes |
8-1/2 lb-in |
8-1/2 lb-in |
| 4500 lbs @ 1 minute |
|
70 lb-in |
| 
